Docker bridge network connect to host

Docker Bridge Network Connect to Host

If you are working with Docker, you may be familiar with the concept of networks. Docker networks are a powerful way to connect containers together so they can communicate with each other. One common use case is to connect a Docker bridge network to the host machine. In this article, we will discuss how to do just that.

First, let’s understand what a Docker bridge network is. When you install Docker on your machine, it creates a default bridge network named ‘bridge’. Containers attached to this network can communicate with each other, but they are isolated from the host machine by default. If you want to connect a bridge network to the host, you will need to configure Docker to allow this.

Step 1: Create a New Bridge Network

The first step is to create a new Docker bridge network that will be connected to the host. You can do this using the following command:

docker network create --driver bridge my_bridge_network

This command will create a new bridge network named ‘my_bridge_network’. You can replace ‘my_bridge_network’ with any name you prefer. Make a note of the network ID as you will need it in the next step.

Step 2: Connect the Bridge Network to the Host

Next, we need to connect the newly created bridge network to the host machine. To do this, we will use the following command:

docker network connect my_bridge_network host

Replace ‘my_bridge_network’ with the name of the bridge network you created in the previous step. This command will connect the bridge network to the host machine, allowing containers on the network to communicate with the host.

Step 3: Verify the Connection

Finally, you can verify that the bridge network is successfully connected to the host by running the following command:

docker network inspect my_bridge_network

This command will display detailed information about the bridge network, including its configuration and connected containers. You should see the host machine listed as one of the connected devices.

Conclusion

Connecting a Docker bridge network to the host machine can be useful in certain scenarios where you need containers to communicate with the host. By following the steps outlined in this article, you can easily configure Docker to allow this connection.

Remember to replace ‘my_bridge_network’ with the actual name of your bridge network when running the commands. With this setup, you can take full advantage of Docker’s networking capabilities and build more flexible and interconnected systems.

Comments